Specialist in :
BIS STANDARDS | ACCREDITATION| TEST FACILITIES | Automotive Testing Services | Environmental Testing | Dry Heat Test Salt Spray Testing | Vibration Testing | Ingress Protection Test- Ip Testing | Impulse And Surge Testing | Ageing Testing (Life Test) | Safety Testing | Function Testing | Endurance Testing
-->
BIS testing lab for Electronic products in delhi

SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES : Nickel Systems

 


Cupronickel or copper-nickel (CuNi) is an alloy of copper that contains nickel and strengthening elements, such as iron and manganese. The copper content typically varies from 60 to 90 percent. (Monel is a nickel-copper alloy that contains a minimum of 52 percent nickel.)Despite its high copper content, cupronickel is silver in colour. Cupronickel is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware. It is sometimes used for the propellers, propeller shafts, and hulls of high-quality boats. Other uses include military equipment and chemical, petrochemical, and electrical industries.


If you are looking for a BIS testing lab for SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES : Nickel Systems Lab in India then, Matrix Test Lab is a prominent name in the field of BIS testing lab for SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES : Nickel Systems Lab  . The Testing of   SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES : Nickel Systems Lab are covered under IS 16046 (Part 1)/ IEC 62133-1  standard testing services. The Team working at matrix Test Lab is experienced and has in-depth knowledge on BIS testing of SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES : Nickel Systems Lab and also have worked for several prestigious clients.


We are reckoned as one of the Best-In-Class ISO/IEC 17025 NABL & BIS Accredited test lab for the products covered under CRS I, II, III, IV & V under "Electronics and IT Goods” (Requirements for Compulsory Registration) Order" by Government of India, Ministry of Electronics and IT (Meity) standards. MTL is a team of qualified, trained and dedicated employees & has state-of- the -art infrastructure to serve needs of the customer.